Thermoelastic Analysis of Disk Brake Taking into Account Variability of Some Structural Parameters
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
- Event:
- Any
- Category:
- Any
Prediction of Pressure Distribution in a Disc Brake
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Thermal Stresses in Oil Immersed Multi Plate Clutches and Brakes
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
A Non-Linear Control for the Yaw Stabilization of Vehicles
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
A New Method for Computing Optimal Obstacle Avoidance Manoeuvres of Vehicles
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
A Four-Wheel-Plane Model of Vehicle - The General Approach
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
A Contribution to an Analysis of the Influence of the Steering System Type on Bus Dynamic Parameters
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Commercial Vehicles as the Subsystem of Transport
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Revitalization Of 1.4 l DMB Engine
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Investigation into the Effect of EGR on the Macro Characteristics of Diesel Combustion
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Mathematical Optimization of 1.4 l Petrol Engine Exhaust Manifold
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Reduction of Intake Valve Deposits Using Gasoline Additive
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
The Impact of Aromatics Content in Diesel Fuel to Diesel Engine Exhaust Emissions
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Impact of Different Diesel Fuel Qualities on Exhaust Emissions
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Numerical Evaluation of the Toxicity Indices for the Internal Combustion Engines Pollutants
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
The Contribution of Engine Oil Properties on Diesel Engine Exhaust Emissions
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Calibration of Microprocessor Control Systems For Specified Levels of Engine Exhaust Toxicity
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Dispersion Modelling of Pollutants in a Canyon Street
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Assessing the Ecological Footprint of an Urban Transportation System
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
New Transmission Control System Concept for High-Speed Tracked Vehicles with Two Planetary Gearboxes
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Influence of Regulatory Changes onto Passenger Car Body Behaviour
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Dynamic Simulation of Behaviour of a "Light Vehicle" for Disabled Users, Tested on a Virtual Road
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Sleep Accidents of Commercial Vehicles and their Consequences
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Lessons and Conclusions - Learned from the Analysis of Bus Rollover Accidents
- Presented at:
- Science & Motor Vehicles (2003) International Conference with Exhibition, Belgrade, Serbia
- Date:
- May 2003
- Publisher:
- JUMV
Technology and Concept for Low Volume Production
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Vehicle Architectures and Volumes: Between Production and Markets
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
New York Concept Car: A Laboratory Between Aesthetic, Technology and Product
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
"VR Applications for reducing time and cost of Vehicle Development Process"
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Beyond geometrical DMU: assessing dynamic bodies interaction in mechanisms and operating systems
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
VPDM Tools as enablers to deploy digital simulations in Automotive Design
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
A Structured Approach to the Evaluation of Stamping Feasibility during part design
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
New perspectives for the reduction of dimensional problems in automotive assemblies
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Laser Flexible Remote Welding
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Configurable Tools for Low Volume Stamping
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Advanced concepts for side impact protection beams
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Vehicle Architectures for Niche Productions: Concepts, Technologies and Proposals
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
A New Aluminium Platform for Low Production High Performance Cars
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Aluminium car bodies for low volume models
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
The Magnesium Door Project
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Mega-Module Car Concept for Production Flexibility
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Validation of Virtual Prototypes via a Virtual Test Laboratory
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Virtual prototyping for strength and durability assessment applied to low production volumes
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Noise and vibration simulation using SEA: Material Database construction technologies
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Micro Cars Scenario
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
The effect of flexibility in the Tolerance Analysis of Mechanical Assemblies
- Presented at:
- Florence ATA 2003 - 8th International Conference, Vehicles Architectures: Products, Processes & Future Developments, Firenze, Italy
- Date:
- May 2003
- Publisher:
- ATA
Energy absorption capability of an aluminum/GFRP hybrid square tube under axial crush and bending collapse
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Optimal Reliability Design for Thin-Walled Beam Structures of Vehicle
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Fatigue Life Prediction of Spot welded Joints by using the QSTS Test
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of Common Rail Direct Injection Diesel Engines (1KD, 2KD)
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Fundamentals of Supersonic Diesel Fuel Jets for use in Diesel Engines
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A Six-member mechanism for Automotive Steering
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Durability Test of a Diesel Engine Using Water Emulsified Fuel
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Using Methyl Ester from Refined Palm Oil Stearin for Compression Ignition Engine
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of an Electronically Controlled Accumulator Type Unit Injector for Two-Stroke Motorcycle Engines
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Fatigue Design of Leaf spring Based on proving ground
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Fatigue Design of Various Type Spot Welded Lap Joint Using the Maximum Stress
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
An Experimental Study on Application of Radical Induced Injection Method to a Real Engine
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Research of New Injection System and Mechanics for Diesel Engine
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Boiling Characteristics at Low Temperature on Enhanced Tubes for Automobile Air-conditioning
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Research on Vehicle Semi-active Suspension System Based on MR Damper - Modeling and Fuzzy Logic Control Without Qualification Method
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
The application of STS wire mesh air cleaner in the motor cycle
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
The Optimization Design of McPherson SuspensionFrontal Wheel Orientation Parameters
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Modeling of Fuel Atomization Characteristics of Common-rail Injector Using KH-DDB Hybrid Breakup Model
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Alternative Ignition Systems for CNG in Diesel Applications
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Study of Injector Nozzle of DI Diesel Engine for Blended Coconut Oils
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Research on Aluminum Structures for Crash Energy Absorption
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A New Computer Based Development Methodology for the Study of Alternative Powertrain Concepts and Their CO2 Emission Reduction Potential
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of a New Lightweight Compact CVT
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of a New Power Train for the Civic Hybrid
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
The Effects of a Vehicle Model on Shifting Transients of a Passenger Car with an Automatic Transmission
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Simulation of Knock with Different Piston Shapes in a Heavy-Duty LPG Engine
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Transient Dynamics Analysis of Q475 Engine Block
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of an ECU Integrated Throttle Body System Module for Compact Fuel Injection System Used in Small Motorcycles and Scooters
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Reduction of Pressure Ripples using a Parallel Line in Hydraulic Pipe-line
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Continuously Variable Rocker Arm Mechanism (VRA)
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Die Design on the Forging Process of Outer Ring Hub by Response Surface Methodology and FE-analysis
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
On-line Tool Wear Estimation in CNC Turning Operations
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Optimizing Ordering and Inventory Control System Under the Supply Chain Concept
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A Structural Analysis Of A Three-Axis Strain Gage Typed Force Sensor For Milling Machines
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Performance Analysis of Finite Capacity Material Requirement Planning System for a Capacity-Constrained Flow Shop
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of A 3-D Solid Modeling System Based on The Parasolid Kernel
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of Mild-hybrid System
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A Study on Emission Characteristics in Oxygen-enriched EGR System
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Soot Formation of Turbulent Premixed Propane Flames in a Constant-Volume Combustor at High Temperatures and High Pressures
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Characteristics of Spark Ignition of the Lean Burn LPG Engine
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Simulation of passengers responsive motion in vehicle frontal crash
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
The Transmission Idle Gear Abnormal Noise Control and Research
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
The Influence of Stopping Engine Idling on Emission Reduction and Fuel Economy
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A Study on a Spark Plug for Charging of Stratified Mixture in a Local Area
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
An Evaporative System Monitoring Method Using a Virtual HC Sensor
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Development of a 125cm 3 4-stroke Engine for Motorcycle with Low Fuel Consumption and Low Emission for Thailand
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Noise Reduction of an Enclosed Cavity by means of Air-gap Systems
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A Study of Driver's Maneuver Characteristics Using the Joy-stick Device
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Analysis of Vehicle-Bicyclist Accidents in Japan and Development of a Method for Controlling Bicyclist Collision Behavior
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Designing an Automobile for the Future. Where does it begin?
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
Side Impact Analysis of an Auto-body with 60TRIP Steel for Side Members
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
The Fracture Occurrence Mechanism and Control Measure Research of Generator and Compressor Bracket
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A Study of Full-Trailer and Semi-Trailer Structures Using Finite Element Method
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
A Numerical Study on Drag Reduction of Commercial Bus by Rear-Spoiler
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE
An idle speed controller for reduced cyclic variability and fuel consumption
- Presented at:
- International Pacific Conference on Automotive Engineering - IPC-12 (Apr 2003), Bangkok, Thailand
- Date:
- April 2003
- Publisher:
- TSAE