A Study on Improvements of Residual Stress of Pipe Bending Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Dynamic Characteristics of Cylinder Head Gaskets for Diesel Engine by Abrupt Change of Cooling Water Temperature and also by Reduction of Tightening Torque of Cylinder Head Bolts Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Comparison of Wears in the Engine Valve and Seat Insert Depending on Valve Materials Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Correlation Analysis for Vehicle Duty Cycles and Wheel Bearings Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Study of Timing Belt Dynamic Behavior & Tracking measurement Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Fatigue Life Prediction of Automotive Rubber Components Under Random Loading Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Evaluation of Dynamic Tensile Characteristics of Polyprophylene with Temperature Variation Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
In-Cylinder Flow Analysis Using Wavelet Method Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Experimental Study on Premixed Charge Compression Ignition (PCCI) Engine with Direct Fuel Injection Impingement and Distribution (OSKA) System Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Numerical and Experimental Analysis of Unsteady Cavitating Nozzle Flow and Diesel Spray Characteristics in a High-pressure Piezo-driven Injector Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Effect of Biodiesel Fuel from Physic Nut (Jatropha Curcas) on an Direct Injection (DI) Diesel Engine Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Experimental Investigation on the THC Reduction in Liquid Phase LPG Injection (LPLi) Engine with Recirculation System Using Canister Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Combined Effects of Fuel Injection Timing and Hot EGR on Ignition, Combustion and Thermal Efficiency in a Small DI Alcohol Engine Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Numerical Study on Dimethyl Ether as an Ignition Improver for Natural Gas Dual Fuel Engines Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study on the Effect of the Fuel Supply Conditions on Combustion in a DI CNG Engine Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Enhancement of Volumetric Efficiency in a Gaseous LPG Injection Engine Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Improvement of Thermal Efficiency in Natural Gas Fueled Engine by Applying Miller Cycle Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Investigation of PZEV Catalyst Configuration Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Idle Performance of an SI Engine with Variations in Engine Control Parameters Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Research on Ultra Low Emission Technology for Large Displacement Motorcycles Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study on the Change of the Fuel Composition during Diurnal Test Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
CFD Analysis on Exhaust Flow Analysis with Various Exhaust Manifolds and Catalyst Geometries Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Experimental Study on Thermal Stability of y-AL2O3 Honeycomb Ceramic Coatings Improved by BaO Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study of Vehicle Parameters Sensitivity of Sports Ultility Vehicle Rollover Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Comparison of Ride Comforts via Experiment and Computer Simulation Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Development of the Variable Rack Stroke (VRS) System Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Study of Harshness Noise Reduction Technique Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Magnetorheological Fluid Technology for Vehicle Applications Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Comprehensive Tire Model with Two-dimensional Contact Patch Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Development of Roll Stability Assist System for the New Heavy Duty Vehicle Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Electronic Control Unit Development Platform Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
An Integrated Development Environment from Modeling to Implementation for Automotive Real-time Embedded Control Systems Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Study of Embedded On-board Information Image Monitoring System Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Software Architecture for Model Based Automotive System Development and its Application Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Model Based Development of Automotive Embedded Systems Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Development of the OBD Test Automation using HILS Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Fault Tolerant Protocol for CAN Flash Programming Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Method of Calculating Nominal Structural Stress for Spot-Welded Structures Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Automotive Suspension Design and Analysis Considering Uncertainties Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Reliability Based Topology Optimization of Rubber Engine Mount Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Reverse Engineering in Automotive Component Industry; Collaboration Between University and Industry Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Development of the Plasma Coated Engine Valve Cap for Diesel Engine Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Implementation of a Synchronous Automated System Inserting Spare Tire Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Shape Optimization of a Lock-up Clutch and Damper Springs for a Thin Torque Converter using B-spline and Finite Element Mesh Smoothing Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Development of an Automated Design System of Gerotor Gearing in Lubrication Oil Pump by Optimal Design and Simulation Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Theoretical and Numerical Study on Characteristics of Gas Flow in a Swirl Injector Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Optimum Design Scheme of Receiver Dryer in Automotive Air-Conditioning System using HFC-134a Refrigerant Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Design of the Block Type Expansion Valve in Automotive Air Conditioning System using HFC-134a Refrigerant Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Optimization of Hybrid Control Strategy for Parallel Hybrid Electric Vehicles Single Shaft and Double Shaft HEV Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Development of New 6 Speed Automatic Transmission for Trucks and Buses Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Development of New Continuously Variable Transmission for Bicycles Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Mechanical Loss Model for a Metal Belt CVT Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Enhanced Friction Component Test System for Accurately Replicating Transmission Shift Conditions Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study of Nano-Particle Characteristics of After-Treatment System for a Heavy Duty Diesel Engine Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Experimental Study of Diesel Fuel Injection for Active Regeneration of DPF System Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Effect of Semi-active Muffler on Back Pressure Characteristics and Engine Performance Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Real Time PM Size Distribution Measuring System Development and PM Distribution Measurement Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Selective Catalytic Reduction of NOx in Diesel Engine Exhaust Over Pt Loaded Mesoporous Support (SBA-15) Catalyst Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Characteristics of Fuel Economy and Exhaust Emission in Turbo Intercooler ECU Common-rail Diesel Engines with a Combined Plasma EGR System Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Effect of Temperature on Product Distribution and Reforming Reaction Rate of N-hexadecane on Rh Catalyst Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
In-Cylinder Soot Measurement Using Two-Dimensional Laser Induced Incandescence and Laser Induced Scattering Method Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Behavior of Combustion Aerosols in an Exhaust Pipe Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Characteristics of Particulate Matters in Exhaust Emissions from a Heavy Duty Diesel Vehicle Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Roadside Measurement of Vehicle Exhaust Particles in Seoul Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Study on Vehicle Operating Speed Modeling Based on Driver-vehicle-road Harmony Principle Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Review of Implementation of OBD II/EOBD System in Poland (Condition in Year 2005) Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Monitoring of Catalytic Converter In CI Engine On Basis of Exhaust Emission In Light of on Board Diagnostic and Ecological Manageability of Engine Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Numerical Study on Tire Wear by Finite Element Method Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Estimation of Tire Forces in Vehicle Dynamics Control by HILS Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study on Maneuver Event Regeneration for Durability Test of Vehicle Suspension System Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Development and Evaluation of an Electric Power Steering System Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study on a Hybrid Electric Brake System by Using ABS and TCS Controller Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Study on Road Safety Evaluation System Based on Virtual Reality Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
An Evaluation Algorithm of IPS in Automotive Application Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study on an Algorithm of a Network Node for a CAN (Controller Area Network)-Based Wiring System Using Polling Structure Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Numerical Analysis of Pressure Control Characteristics in a Solenoid Valve Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Modeling and Analysis of Fuel Cell Powered Light Vehicle with Supercapacitors Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Development of a Simulation System for Validation of Circuit Protection by Fuses for Automotive Wiring Systems Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
An Analysis of the Conducted EMI Emission Using the Transient Response Model Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Function Measurement for Smart Airbag Electronics Control Unit (ECU) Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Traffic Signal and Speed Limit Sign Recognition for Understanding of Road Condition Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Optimal Design of an Intake System using the Booming Noise and the Sound Quality Evaluation Index Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study on Quantifying Damage by Service Load with Relative Damage Method Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Improvement of Sealing Performance of High Pressure Power Steering Hose with Finite Element Analysis Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Impact Collapse Characteristics of Al/CFRP Structural Members for Light Weight of Vehicles Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Resonant Spectrum Evaluation of a Spherical Lens by Resonant Ultrasound Spectroscopy Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Evaluation of Fatigue Strength and Residual Stress Properties due to Hole Expansion with Various Edge Margin Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study on Optimized Layout Design of FAS Line Through Production Flow Analysis Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Fatigue Lifetime Evaluation of Structural Steels Based on Hardness Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Tribological Properties of Aluminum-Ceramic Composite Coating by Plasma Thermal Spary Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
New Calculation Method for the Total Effective Moment of LIPCA Using Actuating Height Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Ultrasonic Characterization of Ply-layup Interface Using CF/Epoxy Composite Laminates under Before and After Curing Conditions Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Fatigue Properties of Al-based Composites Reinforced with Silicon Carbide by Cold Spray Method Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Multidisciplinary Design Optimization of an Aluminum Vehicle Body Using the RSM based SAO Technique Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Effect of Oblique Impact on the Penetration Characteristics of CFRP Curved Shell Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
An Experimental Study on Bolt Tension Load for Bolted Connection between Crossmember and Control Arm Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
A Study of Characteristics of Valve Dynamics using Hydraulic Lash Adjuster in Conditions of Sponge Phenomenon and Aeration of Oil Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Increase of Motoring Torque According to Crankcase Oil Quantity Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
The Effect of Crush Height of Main Bearing on Oil Pressure and Oil Flow Rate Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE
Development of an Accelerated Corrosion Testing Model for Automotive Components : Part 1. Experimental Assessment of Optimized Accelerated Testing Conditions Presented at: International Pacific Conference on Automotive Engineering - IPC-13 (Aug 2005), Gyeongju, Korea Date: August 2005 Publisher: KSAE