Search results

Efficiency Evaluation of Cycloid Speed Reducer by Using LS-DYNA

Failsafe System Requirements for Controller in Automotive Application

Cross-link Density Measurement and Degradation Analysis of a Carbon Black Compounded EPDM Rubber Hose

New Active DPF Regeneration Technology of Diesel Fuel Burner Using Electric Swirl Arc as Ignition Source

Analysis of Fuel Economy and Dynamic Performance with a Slip Lock-up Clutch in an Automatic Transmission Vehicle

Construction of an HEV Simulation Program for Performance Testing

Fatigue Strength Improvement of Welded Lap Joint

A Study on the Adsorption Filter Performance for Reducing Evaporative Gas in the Air Intake System to Satisfy Pzev Regulation

Light Source Spreading Correction Method for Vehicle Camera

Structural Optimization of an Outer Tie Rod for Passenger Car

Structural Design of a Tire Contour Based on Approximation Model

A Study on the Vehicle Dynamic Performance of Integrated Control Using Continuous Damping Control System and Active Roll Control Stabilizer Bar System

Experimental Investigation to Optimize Urea-SCR System on the Light Duty Diesel Engine

Particle Size Distribution and In-cylinder HC & NOx Formation Characteristics for Port Masking During Cold Transient Operation

Vehicular Air Pollution in a Roadway Tunnel

CFD Simulation of a Hydraulic Variable Force Solenoid Valve of Multi-stage A/T Transmissions

Whiplash Injury Evaluations Based on the Head Restraint Dynamic Test

Influence of the Surface Area Upon the Heat Exchange Effectiveness of EGR Cooler in a Diesel Engine

A Study on the Manufacture of the One-piece Hybrid Propeller Shaft for an Automobile

Shear Characteristics of Sn-Ag Solder for Temperature Shift Using Micro Shear Punch Test and FEM

Creep Life for Weldment Microstructures of High Cr-Mo Steel Using SP-creep Test

EMS Control Strategy to Prevent Turbocharger Surge During Abrupt Deceleration on HSDI Diesel Engine

A Study on Emission and Catalyst Temperature Characteristics by Exhaust Synthetic Gas Injection(ESGI) Technology with Various Synthetic Gas Fractions in an SI Engine

A Simulation Based Verification of the Cycle by Cycle Fuel Injection Control

Application of Cerium Dioxide Nano as a Catalyst For Diesel Fuel

To Define the Trajectory of Tractor-semitrailer Moving on the Curved Line

Reliability-based Topology Optimization of Vehicle's Hood Using BESO Method

Semi-experimental Results on a Measured Current Based Method for Reproducing Realistic Steering Feel of Steer-By-Wire Systems

A Study on the Spray Characteristics Of An LPLi System at Different Injection Conditions.

Investigation of the Spatial Distribution of De-NOx Reductant Using Various Mixer-types

Dynamic Analysis of a Hill Climbing Monorail with Magnetic Belt Driving System

Optimum Shape Design of 5mph Bumper Section by Using Intermediate Response Surface Models

Highly Accurate Fuel Consumption Measurement and New Engine Test Methods for Improved Fuel Economy

Research on the Factors of Vibration and Vibration Comfort of Passenger Car Manufactured and Assembled in Vietnam to Select of the Evaluation Indexes

Research And Propose The Road Map To Apply The Standard on Safety Glass for Motor Vehicle in Vietnam

Observation of Unsteady Exhaust-Gas Flow Field Using an Infrared Thermograph

Performance of Catalytic-Converter Flow Deflector in Pulsating Flow

Studying Dynamics of Hydraulic - Pneumatic Drive of Vehicle Brake System

Determining Wear Speed of Friction Members in Automobile Gearbox According to Time, Load and Speed on Testing Stand

Analysing the Value of Gearbox Noise-vibration on Working Modes of Light Trucks

Application of Non-Opening Diagnosis Technology to Determine Wear of Truck Gearbox Made in Vietnam

Researching On Impact Of Loading Changes On Gearbox Noise-vibration of Light Trucks Designed and Made in Vietnam

A Study on Noise Vibration of Trucks Cabin Made in Vietnam

The Integration of CAE in AVLs Product Development Process

Shape Optimization of a Double-Deck Bus for Improved Aerodynamic Stability

Computational Modelling of Car Aerodynamics by Relevance to a Car-Truck Overtaking Process

Numerical Simulations of Canopy Vegetation Influence on Flow, Turbulence and Passive Scalar Dispersion in Street Canyons

Relation of Modelling and Measurement in Design of Positive Displacement Machines

Simulation Approach for the Quenching Process of Internal Combustion Cylinder Head

Tracking of Propagating Turbulent Flames and Autoignition in Enclosure

Turbulence Modeling for In-Cylinder Flows in Engines

The Project Fair Repair - A Contribution to Highlight Possible Impacts of Non-Professional Repair on the Quality and Safety of Vehicles

Theoretical Analysis of Unprofessional Repairs on Quality and Safety of Road Vehicles Using Finite Element Methods

Second Hand Vehicle Maintenance Frauds

Influence of the Tyre Characteristics on the Braking and Steering Performance of Commercial Vehicles

Determining Off Road Tyres Traction Characteristics

Driver Assistance Systems, Status 2009

Drivers and Crew Protection in Frontal Collision of Buses

Comparison of Different NOx Reduction Technologies in terms of Emission Reduction Potential & Cost Effectiveness

Medium Term Projection of Energy Consumption and Transport Activity in Slovenia

Alternative Diesel Fuels and Exhaust Emissions

Vortex Ring-Like Structures in Gasoline Fuel Sprays

Energetic Performances of Monolith and Random Packed Beds Aftertreatment Systems

Hydrogen Based Operation of Internal Combustion Engines

Multibody Numerical Simulation of an IC Engine with Appraisal of the Wear Damage

Combustion phasing in an optical gasoline engine operating in the limit of spark-assisted, controlled auto-ignition

Experimental investigation of the characteristics of oil behaviour in an idealised engine crankcase

History in making - 10 years of Ford Fuel Cell Vehicles

Economic and dynamical analysis of compressed natural gas fuelled vehicles

Analysis and comparison of conventional and hybrid light duty vehicles under urban distributor situation

The non-conventional fuels and noxious

The application of hybrid drive technology in city buses

Influence of geometry modifications of vehicle body joints on their structural behaviour

Utilising Latent Benefits of Substructures in Computer Aided Design and Optimisation of Complex Vehicle Assemblies

Design and Analysis of Impact Resistant Flexible Bollard

The GIS-WEB application for a better knowledge of the road accident characteristics - A study on pedestrian and vehicular mobility safety

Active Safety with Dedicated Short Range Communications

Blind Spot Warning Systems Solutions

Development possibilities of integrated wheel-end control system

Homologation process for ESP based vehicle models

Multi-disc wet brake system for heavy duty tractors

Numerical study of the phenomenon of brake squeal in the disc brakes - first results

Solving of Drum Brake Squealing Problem

Integrated powertrain modelling to enhance comfort of heavy duty vehicles

Chaotic behavior of mechanical vibro impact system with two degrees of freedom and possibilities of chaotic behavior of quarter vehicle model

Maximising Drivability of a CVT Hybrid Driveline by Powershift and Dynamic Engine Start

Impact of clearance to the load of elements of transmission of motor vehicles

Theoretical and experimental analysis and modelling of vehicle suspension kinematics

The concept and installation of brake drum mass production

Advanced laser-based dimensional metrology for inprocess automation of rubberized cord production for high performance tires manufacturing

Virtual manufacturing - Automotive components manufacturers examples

The comparative analysis of the quality of fabricating planetary gear trains based on measuring efficiency

Complex dependability procedure for redundant vehicle systems

Recycling possibilities of shredded light fraction coming from car wrecks

Upgrading the information system for public transport management

Energetically Optimization of Internal Combustion Engine Radiator using the Electro-Hydrodynamic Analogy

Biodiesel Production from Sunflower

Biofuels Market SWOT Analyse

Functioning Conditions of the Internal Combustion Engines using Specific Fuels Mixed with Alcohol

LPG Fueling for a Small Carburretor Engine