- Development of a New Variable Event and Lift (VVEL) System for a Direct Injection V8 Gasoline Engine GBP 11.00
- Research of a Real Time, Model Based Engine Control System for a Passenger Car Diesel Engine GBP 11.00
- A Study on the Manufacture of the One-piece Hybrid Propeller Shaft for an Automobile GBP 11.00
- Studying Dynamics of Hydraulic - Pneumatic Drive of Vehicle Brake System GBP 11.00
- The Effects of Seatbelts Worn by Pregnant Female Drivers During Vehicle Collisions GBP 11.00
- Research And Propose The Road Map To Apply The Standard on Safety Glass for Motor Vehicle in Vietnam GBP 11.00
- Particle Size Distribution and In-cylinder HC & NOx Formation Characteristics for Port Masking During Cold Transient Operation GBP 11.00
- Semi-experimental Results on a Measured Current Based Method for Reproducing Realistic Steering Feel of Steer-By-Wire Systems GBP 11.00
- Spray Characteristics of Ethanol Fuel Using Local-contact Microwave-heating Injector GBP 11.00
- Dynamic Analysis of a Hill Climbing Monorail with Magnetic Belt Driving System GBP 11.00
- Analysing the Value of Gearbox Noise-vibration on Working Modes of Light Trucks GBP 11.00
- Development Of A Forward Collision Avoidance System Based on Recognition of Preceding Vehicle Tail Lamp GBP 11.00
- Experimental Investigation to Optimize Urea-SCR System on the Light Duty Diesel Engine GBP 11.00
- Practical Use and Popularization Technologies of Fuel Injection System for Small Motorcycles GBP 11.00
- Research on the Factors of Vibration and Vibration Comfort of Passenger Car Manufactured and Assembled in Vietnam to Select of the Evaluation Indexes GBP 11.00
- Observation of Unsteady Exhaust-Gas Flow Field Using an Infrared Thermograph GBP 11.00
- Determining Wear Speed of Friction Members in Automobile Gearbox According to Time, Load and Speed on Testing Stand GBP 11.00
- Highly Accurate Fuel Consumption Measurement and New Engine Test Methods for Improved Fuel Economy GBP 11.00
- EMS Control Strategy to Prevent Turbocharger Surge During Abrupt Deceleration on HSDI Diesel Engine GBP 11.00
- Load Path U* Analysis of Truck Cab Structure Under Frontal Collision GBP 11.00
- Application of Cerium Dioxide Nano as a Catalyst For Diesel Fuel GBP 11.00
- Influence of the Surface Area Upon the Heat Exchange Effectiveness of EGR Cooler in a Diesel Engine GBP 11.00
- Rollover Prevention of Heavy Duty Vehicles Using Independent Braking Force Control GBP 11.00
- A Study on Emission and Catalyst Temperature Characteristics by Exhaust Synthetic Gas Injection(ESGI) Technology with Various Synthetic Gas Fractions in an SI Engine GBP 11.00
- Optimum Shape Design of 5mph Bumper Section by Using Intermediate Response Surface Models GBP 11.00
- Performance of Catalytic-Converter Flow Deflector in Pulsating Flow GBP 11.00
- CFD Simulation of a Hydraulic Variable Force Solenoid Valve of Multi-stage A/T Transmissions GBP 11.00
- A Study on the Spray Characteristics Of An LPLi System at Different Injection Conditions. GBP 11.00
- To Define the Trajectory of Tractor-semitrailer Moving on the Curved Line GBP 11.00
- Effects of Fuel Composition on Knock Tolerance and Flame Instability GBP 11.00
- Reliability-based Topology Optimization of Vehicle's Hood Using BESO Method GBP 11.00
- Study on PCCI Engine With Direct Fuel Injection Impingement and Distribution (OSKA) System - Investigation on Compression Ratio and Fuel Properties - GBP 11.00
- Vehicular Air Pollution in a Roadway Tunnel GBP 11.00
- Simulation Trial of Woody Biomass Generation with Automobile Engine GBP 11.00
- Application of Non-Opening Diagnosis Technology to Determine Wear of Truck Gearbox Made in Vietnam GBP 11.00
- Creep Life for Weldment Microstructures of High Cr-Mo Steel Using SP-creep Test GBP 11.00
- Characterization of Power Transmission of V-rubber CVT Having One Free Surface in Rotation GBP 11.00
- Investigation of the Spatial Distribution of De-NOx Reductant Using Various Mixer-types GBP 11.00
- A Simulation Based Verification of the Cycle by Cycle Fuel Injection Control GBP 11.00
- Researching On Impact Of Loading Changes On Gearbox Noise-vibration of Light Trucks Designed and Made in Vietnam GBP 11.00
- Whiplash Injury Evaluations Based on the Head Restraint Dynamic Test GBP 11.00
- Feasibility of Si-ci Combustion at Lean Mixture of Primary Reference Fuels with Hydrogen Addition GBP 11.00
- Powertrain System of Honda FCX Clarity Fuel Cell Vehicle GBP 11.00
- Development Of A Safe Driving Evaluation System Based on Driver Cognitive-operation Model at Intersections GBP 11.00
- Study on Characteristics of Event Data Recorders for Accident Reconstruction in Japan GBP 11.00
- Shear Characteristics of Sn-Ag Solder for Temperature Shift Using Micro Shear Punch Test and FEM GBP 11.00
- Perspective of Future Energy Mix in Transport Sector GBP 11.00
- A Study on Varying the Carrier Frequency of a Pulse-width-Modulated Motor-inverter System GBP 11.00
- Analysis on Drivers Decision to Stop around Dilemma Zone Utilizing Event-triggered type Drive Recorder GBP 11.00
Subtotal (excluding shipping and tax) GBP 539.00