Promoting excellence in mobility engineering

  1. FISITA Store

Your basket

  1. The Effect of Fuel Temperature and Humidity on Diesel Engine GBP 11.00 Remove
  2. Accident Occurrence of School Buses - Results of a Pilot Study GBP 11.00 Remove
  3. Strength of a Passenger Car Body with Relocated Seat Belt Anchorage Points GBP 11.00 Remove
  4. Modeling of NO Formation and Emission through Turbulent Mixing and Chemical Processes in Diesel Combustion GBP 11.00 Remove
  5. The Development of Lubricating Fluid Technology for Hybrid Electrical Dual Clutch Transmissions (e-DCT) GBP 11.00 Remove
  6. To calculate the stress of car body by SAP2000 GBP 11.00 Remove
  7. Alacsonypadlós Városi Autóbuszok Belsö Utasáramlását Javító Fejlesztési Lehetöségek GBP 11.00 Remove
  8. A Study of the Effect of Interference Force on Design Sensitivity GBP 11.00 Remove
  9. Detection of Driver's Low Arousal Level to Prevent Traffic Accident GBP 11.00 Remove
  10. Development of Full Vehicle Simulation Method Using Modal Approach GBP 11.00 Remove
  11. Determining the Threshold Value of Knock Intensity for a Knock Control System in Spark Ignition Engines GBP 11.00 Remove
  12. Analysis of Unsprung Mass Behavior for Understanding Straight Running Stability of Heavy Duty Vehicles GBP 11.00 Remove
  13. Development of the Unmanned Vehicle Driving System for Accelerated Durability Testing GBP 11.00 Remove
  14. Prediction of Headlamp Impact Behavior with Mat-Samp Material Model GBP 11.00 Remove
  15. Research on Life Calculation of Automobile Clutch GBP 11.00 Remove
  16. Development of an Active Control Engine Mount System GBP 11.00 Remove
  17. Experimental Study on Automobile Driving Resistance on Dynanometer Roll GBP 11.00 Remove
  18. Dynamic Tyre Response to Yaw Angle Variations GBP 11.00 Remove
  19. Modeling of Cavitation Phenomena in Fuel Injection System of Diesel Engines by Use of Experimental Results GBP 11.00 Remove
  20. Fundamental Analysis of the Barrier-Crash Dynamics for Heavy Duty Trucks GBP 11.00 Remove
  21. Hydraulic Pressure Controller Design for Direct Yaw Moment Control System GBP 11.00 Remove
  22. A Study into the Effects on a Vehicle of Australian Coarse Road Surface Textures GBP 11.00 Remove
  23. Experimental Evaluation on Application of Induction System in Two Stroke Small Spark Ignition Engine GBP 11.00 Remove
  24. Utilization of Computer Simulations for the Assessment of the Effect of Force Load on the Škoda 14 Tr M Trolleybus Composite Doors Damage GBP 11.00 Remove
  25. Effectiveness of Restrain Systems in Bus Rollover GBP 11.00 Remove
  26. Development of a New 1.5L 4-Valve DOHC Lean-burn Engine with the Wider Air/Fuel Range Three Way Catalyst GBP 11.00 Remove
  27. Characteristics of Scavenging and Combustion in a Two-cycle Uniflow Spark-ignition Engine GBP 11.00 Remove
  28. Vehicle Dynamics Estimation Using Kalman Filters GBP 11.00 Remove
  29. The effect of the Higher Pressured Injection System on the Optimization of Fuel Consumption and Emissions of Heavy Duty Diesel Engine GBP 11.00 Remove
  30. A Study of Road Slope Estimation of Running Vehicles with Automatic Transmissions GBP 11.00 Remove
  31. Measurement of Transient Nitric Oxide Emission in a Turbocharged Diesel Exhaust Using a Conventional Chemiluminescent Analyser GBP 11.00 Remove

Subtotal (excluding shipping and tax) GBP 341.00

Continue shopping