Technical papers

The FISITA Web Congress 2020 offers 64 technical papers with many offering a virtual presentation. Papers and presentations are now available on the new FISITA Web Congress 2020 website.

In addition to the technical papers, the Web Congress hosted an online Keynote Session on 24 November 2020. This session featured speakers from Future Matters, Porsche Engineering, Qualcomm, the Aspen Institute and Škoda Auto. The Keynote Session was open to all to attend.

Final List of Technical Papers

1. DGT - Digital Transformation

F2020-DGT-007
Customer-Focussed Automatic Test Course Design

Mr. Florian Grober, Volkswagen AG, GERMANY
Dr. -Ing. Andreas Janßen, Volkswagen AG, GERMANY
Prof. Dr.-Ing. Ferit Küçükay, TU Braunschweig, GERMANY

F2020-DGT-012
upBUS – Electrical, autonomous driving, transmodular bus for public transport systems

Mr. Tobias Meinert, Institute of Structural Mechanics and Lightweight Design of RWTH Aachen University, GERMANY
Mr. Mauricio Chaves-Vargas, upBUS UG (haftungsbeschränkt), GERMANY
Mr. David Bierbüsse, Chair of High Frequency Electronics, GERMANY
Mr. Eduard Heidebrecht, Chair of High Frequency Electronics of RWTH Aachen University, GERMANY
Prof. Dr.-Ing. Renato Negra, Chair of High Frequency Electronics of RWTH Aachen University, GERMANY
Prof. Dr.-Ing. Kai-Uwe Schröder, Institute of Structural Mechanics and Lightweight Design of RWTH Aachen University, GERMANY

F2020-DGT-016
New Approaches to Digitalizing the Design and Validation Process of Complex Mount Bearings with the Focus on Durability

Dipl.-Ing. Steven Ernst, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Dipl.-Ing. Felix Schmid, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Dr. -Ing. Kay Büttner, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Prof. Dr.-Ing. Günther Prokop, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY

F2020-DGT-031
A Method for User-Friendly PID-Parameter Optimization for Highly Dynamic Component Test Benches

Mr. Kai Wolter, Karlsruher Institut für Technologie - Institut für Produktentwicklung, GERMANY

2. ADM - Advanced Vehicle Driveline and Energy Management

F2020-ADM-030
Research on Electromagnetic Vibration and Noise Characteristics of Double-rotor Permanent Magnet Synchronous In-wheel Motor

Prof. Dr.-Ing. Lijun Zhang, Tongji University, CHINA
Mr. Jie Xu, Tongji Univeristy, CHINA
Dr. -Ing. Dejian Meng, Tongji Univeristy, CHINA

F2020-ADM-040
Raising the thermal limits of an electrical motor based on an air gap winding by applying improved laminated layers and optimized cooling duct geometries

Dr. Joerg Sauerhering, Otto-von-Guericke-University-Magdeburg, GERMANY
Dr. Gunar Boye, Otto-von-Guericke-University-Magdeburg, GERMANY
Prof. Dr. Frank Beyrau, Otto-von-Guericke-University-Magdeburg, GERMANY
Mr. Sergey Perekopskiy, Otto-von-Guericke-University-Magdeburg, GERMANY
Mrs. Olena Stamann, Otto-von-Guericke-University-Magdeburg, GERMANY

F2020-ADM-054
Efficient commercial powertrains – How to achieve a 30% GHG reduction in 2030

Mr. Dieter van der Put, FEV Group GmbH, GERMANYA

F2020-ADM-055
Combined Cycle Gas Turbine System Optimization for Extended Range Electric Vehicles

Dr. Eng. Charbel Mansour, Lebanese American University, UNITED STATES
Ms. Aya Barakat, Lebanese American University, UNITED STATES

F2020-ADM-060
Capacity characteristics analysis and remaining useful life estimation method of ternary lithium battery pack

Mr. Weijian Li, South China University of Technology, CHINA
Prof. Dr. Fengchong Lan, South China University of Technology, CHINA
Prof. Dr. Jiqing Chen, South China University of Technology, CHINA
Dr. Yigang Li, South China University of Technology, CHINA

F2020-ADM-069
Application of PM Gearset in Automotive Gearbox

Ing. Ondřej Miláček, CTU in Prague, CZECH REPUBLIC
Prof. Gabriela Achtenová, CTU in Prague, CZECH REPUBLIC

F2020-ADM-073
A new engine concept to control the ignition timing of HCCI combustion: Piston Assisted Compression Ignition (PACI)

Dr. Louis Sileghem, Ghent University, BELGIUM

F2020-ADM-081
The new solutions of energy utilization of the exhaust gases of the internal combustion engines through hybrid turbochargers

Ing. Rares Lucian Chiriac, "Transilvania" University, ROMANIA
Prof. Dr.-Ing. Anghel Chiru, "Transilvania" University, ROMANIA

F2020-ADM-083
Dog Clutch Without Circular Backlash – Design Optimization Using Multi-Body Simulationx

Ing. Michal Jasný, Czech Technical University in Prague, CZECH REPUBLIC
Dr.-Ing. Michal Hajžman, University of West Bohemia, CZECH REPUBLIC
Dr.-Ing. Radek Bulín, University of West Bohemia, CZECH REPUBLIC

F2020-ADM-085
Suitability of Using Electric Vehicles in Asia Countries

Mr. Tiande MO, Hong Kong Productivity Council, CHINA - HONG KONG
Prof. LAU Kin Tak, Swinburne University of Technology, AUSTRALIA
Dr. Chi Kin POON, Hong Kong Productivity Council, CHINA - HONG KONG
Xiaohua Ge, Swinburne University of Technology, AUSTRALIA
Mr. Yu LI, Hong Kong Productivity Council, CHINA - HONG KONG
Mr. Chuliang SHAN, Hong Kong Productivity Council, CHINA - HONG KONG

F2020-ADM-126
Data-Based Parameterization of Thermal Models of a Gearbox

Dipl.-Ing. Erwin Brosch, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren Stuttgart, GERMANY
Mr. M. Sc. Alfons Wagner, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren Stuttgart, GERMANY
Prof. Dr.-Ing. Hans-Christian Reuss, Forschungsinstitut für Kraftfahrwesen und Fahrzeugmotoren Stuttgart, GERMANY

3. EPV - Emissions and Pollutants Caused by Vehicles

F2020-EPV-014
Optimization Design of Large-displacement Motorcycle Emission Testing Procedure

Mr. Wanli YUAN, CCIC WEST TESTING COMPANY LIMITED, CHINA
Mr. Tiande MO, Hong Kong Productivity Council, CHINA - HONG KONG
Dr. Mr. Yu LI, Hong Kong Productivity Council, CHINA - HONG KONG
Mr. Baomin DUAN, CCIC WEST TESTING COMPANY LIMITED, CHINA
MMr. Wei ZHONG, CHINA QUALITY CERTIFICATION CENTRE, CHINA

F2020-EPV-027
Analytical Investigation of Tire Induced Particle Emissions

Mr. Toni Feißel, TU Ilmenau, GERMANY
Prof. Dr.-Ing. Klaus Augsburg, TU Ilmenau, GERMANY

F2020-EPV-028
High fuel pressure and multiple injection of gasoline for the particle emission reduction under cold conditions

Mr. Sebastian Blochum, Technical University of Munich, Institute of Internal Combustion Engines, GERMANY
Mr. Naoki Yoneya, Hitachi, Ltd., JAPAN
Prof. Dr.-Ing. Georg Wachtmeister, Technical University of Munich, Institute of Internal Combustion Engines, GERMANY
Mr. Yoshihito Yasukawa, Hitachi Automotive Systems Europe GmbH, GERMANY
Mr. Yuki Sugiyama, Hitachi Automotive Systems, Ltd., JAPAN

F2020-EPV-071
Real-time torque estimation of an air conditioner compressor for the CO2 emissions reduction from an engine vehicle

Mr. Jung-Myung Kwak, Hanon systems, REPUBLIC OF KOREA
Mr. Yong-Hee Kim, Hanon systems, REPUBLIC OF KOREA
Mr. Peter Zawadzky, TE, GERMANY
Mr. Simon Scherner, TE, GERMANY

4. CAF - Conventional and Alternative Fuels and Lubricants

F2020-CAF-001
Improving Efficiency and Power Density of Hydrogen Engines of Positive Ignition Single-Fuel and Compression Ignition Dual-Fuel designs

Dr. Alberto Boretti, Prince Mohammad Bin Fahad University, SAUDI ARABIA

F2020-CAF-007
Fluid Dynamics Analysis of Bubble Generation Process in Engine Oil Based on Model Experiments

Dr. Masao Ishihama, Kanagawa University, JAPAN

5. MCF - Mobility Comfort

F2020-MCF-002
The Control Strategy Research on Reduction of High-Frequency Noise and Vibration for Permanent Magnet Synchronous Motor

Ms. Lulu Wei, Jilin University, CHINA
Prof. Fangwu Ma, Jilin University, CHINA
Dr. Hongbin Yin, Shandong University of Technology, CHINA
Dr. Liang Wu, Jilin University, CHINA
Mr. Hui Gao, China Automotive Technology and Research Center Co., Ltd., CHINA

F2020-MCF-006
Vibration Transmissibility Analyses of Asymmetric Cantilevered Structures with Screw Fastening by Mode Equivalent Factors

Dr. Gyoko Oh, Tokyo Roki Co., Ltd., JAPAN

F2020-MCF-012
Start-up transient Vibration analysis and control of a vehicle equipped with a 3-cylinered engine

Dr. Yan Jin, china automotie engineering research institute Co.Ltd, CHINA

F2020-MCF-020
Factors Affecting Squeak Characteristics of Plastic Parts And Its Prevention Solutions

Mr. Amit Kumar, Mahindra & Mahindra Ltd, INDIA
Mrs. Edlin Lewis, Mahindra & Mahindra Ltd., INDIA
Mr. Mohammed Riyazuddin, Mahindra & Mahindra Ltd., INDIA
Mr. Raghavendran Prasath, Mahindra & Mahindra Ltd., INDIA
Mr. Sandeep Shukla, Mahindra & Mahindra Ltd., INDIA

F2020-MCF-057
Study and Reduce the Interior Noise Roughness During Acceleration

Dr. Yan Jin, China Automotie Engineering Research Institute Co.Ltd, CHINA

F2020-MCF-062
Vibro-acoustic reciprocity analysis using dodecahedral sound source and its application for material assessment

Mr. Nitesh Anerao, Mahindra & Mahindra Ltd., INDIA
Mr. Tulesh Kumar, Mahindra & Mahindra Ltd., INDIA

F2020-MCF-066
Vibration behavior of powertrain test benches - measurement, analysis and modelling

Mr. Alfons Wagner, FKFS - Research Institute of Automotive Engineering and Vehicle Engines Stuttgart, GERMANY
Dipl.-Ing. Erwin Brosch, FKFS - Research Institute of Automotive Engineering and Vehicle Engines Stuttgart, GERMANY

F2020-MCF-088
Kalman filter based active noise control for vibro-acoustic cavities

Dr. Amrita Puri, Indian Institute of Technology, Jodhpur, INDIA
Prof. Subodh V. Modak, IIT Delhi, INDIA
Prof. Kshitij Gupta, IIT Delhi, INDIA

6. ACM - Automated and Connected Mobility

F2020-ACM-004
Research on system identification of vehicle model for model based reinforcement learning automated parking

Dr. Shaoyu Song, Tongji university, CHINA
Prof. Dr.-Ing. Hui Chen, Tongji university, CHINA
Dr. Jiren Zhang, Tongji university, CHINA
Mr. Fengwei Hu, Tongji university, CHINA

F2020-ACM-019
Coupling Apollo with the CommonRoad Motion Planning Framework

Ms. Xiao Wang, Technische Universität München, GERMANY
Ms. Anna-Katharina Rettinger, Technische Universität München, GERMANY
Prof. Dr.-Ing. Matthias Althoff, Technische Universität München, GERMANY
Dr. Md Tawhid Bin Waez, Ford Motor Company, UNITED STATES

F2020-ACM-042
Positioning Sensor System for transmodular Mobility

Mr. David Bierbuesse, RWTH Aachen University, GERMANY
Mr. Eduard Heidebreicht, RWTH Aachen University, GERMANY
Mr. Tobias Meinert, RWTH Aachen University, GERMANY
Mr. Mauricio Chaves-Vargas, upBUS UG (haftungsbeschränkt), GERMANY
Prof. Dr. Renato Negra, RWTH Aachen University, GERMANY
Prof. Dr. Kai-Uwe Schröder, RWTH Aachen University, GERMANY

F2020-ACM-044
Human vs. Automation - Who Drives the Future?

Dr. -Ing. Václav Jirovský, Czech Technical University in Prague, Faculty of Transportation Sciences/Faculty of Mechanical Engineering, CZECH REPUBLIC

F2020-ACM-065
Assessing the Readiness of Infrastructure for Automated Vehicles from a safety perspective

Mrs. Lina Konstantinopoulou, EuroRAP, BELGIUM
Mr. Anthony Germanchev, ARRB, AUSTRALIA
Mr. Marko Ševrović, University of Zagreb, CROATIA
Mr. James Bradford, iRAP, UNITED KINGDOM

F2020-ACM-067
Evaluating autonomous functions performance through simulation using interoperable sensor, vehicle, and environment models

Dipl.-Ing. Serge Laverdure, ESI Group, FRANCE
Dr. Mokrane Hadj-Bachir, Esi Group, FRANCE
Ing. Philippe De Souza, ESI Group, FRANCE
Dr. Dominique Gruyer, Ifsttar, FRANCE

F2020-ACM-069
Automated Turning Traveling to the Specified Exit Point

Dr. Eng. Takeshi Takiyama, Osaka City University, JAPAN
Dipl.-Ing. Jinichi Fujita, Osaka City University , Graduate school., JAPAN

F2020-ACM-073
Methodology for Automated Definition of Critical Scenarios

Mr. Thaddäus Menzel, IDIADA Fahrzeugtechnik GmbH, GERMANY
Mr. Thiago de Borba, IDIADA Fahrzeugtechnik GmbH, GERMANY

F2020-ACM-083
Sensor Time Synchronization in Smart Road Infrastructure

Mr. Numan Senel, Technische Hochschule Ingolstadt, GERMANY
Prof. Dr. Gordon Elger, Technische Hochschule Ingolstadt, GERMANY
Prof. Dr. Andreas Festag, Fraunhofer IVI Applied Research Center for Connected Mobility and Infrastructure, GERMANY

F2020-ACM-096
Scenario Based Testing of Automated Driving Systems: A Literature Survey

Dipl.-Ing. Demin Nalic, University of Technology Graz, AUSTRIA
Dipl.-Ing. Tomislav Mihalj, TU Graz, AUSTRIA
Dipl.-Ing. Maximilian Bäumler, TU Dresden, GERMANY
Dipl.-Ing. Matthias Lehmann, TU Dresden, GERMANY
Prof. Dr.-Ing. Arno Eichberger, TU Graz, AUSTRIA

7. VDC - Vehicle Dynamics and Controls

F2020-VDC-011
Experimental and Simulative Analysis of Tire Enveloping Characteristics Based on a Tire Measurement Database

Dipl.-Ing. Yun Pang, Technische Universität Dresden, GERMANY
Dipl.-Ing. Tobias Schramm, Technische Universität Dresden, GERMANY
Dipl.-Ing. Jan Kubenz, Technische Universität Dresden, GERMANY
Prof. Dr.-Ing. Günther Prokop, Technische Universität Dresden, GERMANY

F2020-VDC-042
Coordinated control of AFS and DYC for 4WID-EVS handling and stability based on driving state prediction

Dr. Cong Liu, Beijing Institute of Technology, CHINA
Prof. Dr. Hui Liu, Beijing Institute of Technology, CHINA

F2020-VDC-047
Validity Quantification of Driver-in-the-Loop Simulation in Motorsport

Mr. Thomas Schwarzhuber, BMW Motorsport, GERMANY
Mr. Lukas Wörle, BMW Motorsport, GERMANY
Dr. -Ing. Michael Graf, BMW Motorsport, GERMANY
Prof. Arno Eichberger, Graz University of Technology, AUSTRIA

F2020-VDC-070
Impact on the Quality of Automated Lateral driving when Implementing an 2DOF Steering Model and Vary Driving Dynamic Quantities

Mr. Julian Staiger, TU Delft, NETHERLANDS

F2020-VDC-074
Subjective perception prognosis of divergent data sets of the shift strategy of modern dual-clutch transmissions on the basis of simulation results

Dipl.-Ing. John Köber, Karlsruhe Institute of Technology (KIT), IPEK - Institute of Product Engineering, GERMANY
Prof. Dr.-Ing. Albert Albers, Karlsruhe Institute of Technology (KIT), IPEK - Institute of Product Engineering, GERMANY
Paula Marta Jacobs, TU Braunschweig, GERMANY
Ercan Karakus, Hochschule Albstadt-Sigmaringen, GERMANY

F2020-VDC-075
Development of Lateral Control for Different Electric Vehicle Drive and Steering Systems

Dipl.-Ing. Amauri da Silva Junior, Technische Hochschule Ingolstadt, GERMANY
Prof. Dr.-Ing. Christian Birkner, Technische Hochschule Ingolstadt, GERMANY
Mr. Naveen Shirur, Technische Hochschule Ingolstadt, GERMANY

F2020-VDC-081
Design and Development Of An In-Wheel Suspension With Novel Automatic Camber Control Strategy For Improved Handling

Mr. Sameer Rafiq Shah, University of Michigan - Dearborn, UNITED STATES
Mr. Dilip Kumar, Sir M. Visvesvaraya Institute of Technology, INDIA
Mr. Nishant Tiwari, Sir M. Visvesvaraya Institute of Technology, INDIA

F2020-VDC-089
Drive-by-wire vehicle traction control system with predefined safety limits

Ing. Denis Efremov, Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control Engineering, CZECH REPUBLIC
Dr.-Ing. Tomas Hanis, Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Control Engineering, CZECH REPUBLIC
Dr.-Ing. Martin Klauco, Institute of Information Engineering, Automation, and Mathematics, Slovak University of Technology in Bratislava, SLOVAKIA

F2020-VDC-094
Hybrid Approach to Identify Kinematic Points of a Suspension System

Dipl.-Ing. Clemens Deubel, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Mr. Peter Hoffmann, Technische Universität Dresden, GERMANY
Mr. Chao Liu, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Dipl.-Ing. Jan Kubenz, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY
Prof. Dr.-Ing. Günther Prokop, Chair of Automobile Engineering - Technische Universität Dresden, GERMANY

8. PIF - Passive and Integral Safety

F2020-PIF-017
Crashworthiness of C-SMC : a Structural Battery Case for Automotive Application

Mr. Federico Coren, Tu Graz, Institut of Automotive Engineering, AUSTRIA
Mr. Philipp S. Stelzer, Institut für Polymer Product Engineering, Johannes Kepler University Linz - JKU, AUSTRIA

F2020-PIF-033
Collision Prediction for Irreversible Pre-Crash Safety Measures

Mr. Robert Lugner, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY
Mr. Maximilian Inderst, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY
Mr. Gerald Sequeira, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY
Mr. Kilian Schneider, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY
Prof. Dr.-Ing. Thomas Brandmeier, CARISSMA Institute of Safety in Future Mobility, TH Ingolstadt, GERMANY

F2020-PIF-038
Parameterization of standard test scenarios of automated vehicles using accident simulation data

Dipl.-Ing. Martin Urban, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY
Dipl.-Ing. Jorge Lorente Mallada, Toyota Motor Europe, BELGIUM
Dipl.-Ing. Maria Pohle, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY
Dr. -Ing. Christian T. Erbsmehl, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY
Dr. -Ing. Pablo Puente Guillen, Toyota Motor Europe, BELGIUM
Dipl.-Ing. Satoshi Taniguchi, Toyota Motor Corporation, JAPAN
Dr. -Ing. Tom Landgraf, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY

F2020-PIF-039
A methodology for building simulation files from police recorded accident data (for ADAS effectiveness assessment)

Mr. Martin Urban, Fraunhofer Institute for Transportation and Infrastructure Systems, GERMANY
Dr. -Ing. Christian T. Erbsmehl, Fraunhofer Institute for Transport and Infrastructure IVI, GERMANY
Dipl.-Ing. Jorge Lorente Mallada, Toyota Motor Europe, BELGIUM
Dr. -Ing. Pablo Puente Guillen, Toyota Motor Europe, BELGIUM
Dipl.-Ing. Satoshi Taniguchi, Toyota Motor Corporation, JAPAN

F2020-PIF-042
Development of an Advanced Vehicle Restraint Systems with Special Consideration of Small Occupants with help of an Adaptive Steering Column

Mr. Felix Bentgens, Trier University of Applied Sciences, GERMANY
Prof. Dr.-Ing. Peter Koenig, Trier University of Applied Sciences, GERMANY
Mr. Marco Mueller, Trier University of Applied Sciences, GERMANY
Dr. Jaikumar Mayakrishnan, Hindustan Institute of Technology & Science, INDIA
Mr. Raghavendran Pala Raviramachandran, Hindustan Institute of Technology & Science, INDIA

F2020-PIF-048
Tagging Real-World Scenarios for the Assessment of Autonomous Vehicles

Mr. Erwin de Gelder, TNO, NETHERLANDS
Dr. Olaf Op den Camp, TNO, NETHERLANDS

F2020-PIF-049
Automatic Car Reverse Braking System Based on a ToF Camera Sensor

Mr. Rodrigo Negri de Azeredo, Federal University of Parana - UFPR, BRAZIL
Prof. Dr. Ondrej Vaculin, Technische Hochschule Ingolstadt - THI, GERMANY
Prof. Dr. Gustavo Henrique da Costa Oliveira, Federal University of Parana - UFPR, BRAZIL

F2020-PIF-051
Estimation of the Impact of Human Body Variation on Its Crash Behavior Using Machine Learning Methods

Mr. Franz Plaschkies, Technische Hochschule Ingolstadt / CARISSMA, GERMANY
Prof. Ondrej Vaculin, Technische Hochschule Ingolstadt, GERMANY

9. VES - Vehicle Electronics and Software

F2020-VES-002
A Real-Time and Calibration-Free Lane Departure Warning System for AUTOSAR-Based ECUs

Mr. Islam Gamal, Mentor Graphics, EGYPT
Mr. Ahmed Hamed, Mentor Graphics, EGYPT

F2020-VES-014
Procedure for the Safety Assessment of an Autonomous Vehicle Using Real-World Scenarios

Mr. Erwin de Gelder, TNO, NETHERLANDS
Dr. Olaf Op den Camp, TNO, NETHERLANDS

F2020-VES-017
Agile Software Design Verification and Validation (V&V) for Automated Driving

Dr. Yixiao Li, Nagoya University, JAPAN
Prof. Dr. Yutaka Matsubara, Nagoya University, JAPAN
Mr. Daniel Olbrys, Toyota Research Institute - Advanced Development, Inc., UNITED STATES
Mr. Kazuhiro Kajio, Toyota Research Institute - Advanced Development, Inc., JAPAN
Mr. Takashi Inada, Toyota Research Institute - Advanced Development, Inc., JAPAN
Prof. Dr. Hiroaki Takada, Nagoya University, JAPAN

F2020-VES-020
A STPA-based Approach for Systematic Security Analysis of In-vehicle Diagnostic and Software Update Systems

Jinghua Yu, Tongji University, CHINA
Prof. Dr. Stefan Wagner, University of Stuttgart, GERMANY
Prof. Dr. Feng Luo, Tongji University, CHINA

10. MML - Manufacturing, Materials and Lightweight Solutions

F2020-MML-026
Concept Level Performance improvement in Frame with Light-weighting

Mr. Mihir Bhalerao, Mahindra & Mahindra Ltd., INDIA
Mr. Samir Rawte, Mahindra & Mahindra Ltd., INDIA
Mr. Jeyevijeyan RS, Mahindra & Mahindra Ltd., INDIA
Mr. Hareesh Krishnan, Mahindra & Mahindra Ltd, INDIA

F2020-MML-031
The Lightwheight Design of Anticollision Beam of 7075 Aluminum Alloy patch panel mixed with Corbon Fiber Reinforced Composites

Dr. Eng. Zhimin Liu, BAIC Motor Co.Ltd., CHINA
Mr. Leigang Chen, BAIC Motor Co.Ltd., CHINA

F2020-MML-047
Design And Analysis of Light Weight Helical Gear Limited Slip Differential For Racing Car Applications

Mr. Shrinivas Tarte, BAJAJ Auto India, INDIA

F2020-MML-059
Carbon Fiber Composite Chassis Components, Opportunities and Challenges

Dr. David Wagner, Ford Motor Company, UNITED STATES
Mr. Daniel Mainz, Ford Motor Company, GERMANY
Mr. Thomas Gerhards, Ford Motor Company, GERMANY
Dr. Xiaoming Chen, Ford Motor Company, UNITED STATES